Professional mobile marine electrical for resident boats and visiting vessels — we come to your slip, mooring, or anchorage. Wiring, batteries, shore power & electronics, finished to ABYC and Transport Canada standards.
Every service performed by a qualified marine electrician at your location — on your schedule.
Complete electrical wiring systems, upgrades, and full rewiring for vessels of all sizes. Marine-grade materials and code-compliant installations.
Battery bank design, installation, and upgrades. AGM, lithium, and gel cell systems with charging, isolators, and monitors configured for peak performance.
Shore power connections, galvanic isolators, and power management systems. Safe, code-compliant installations that protect your vessel.
Chartplotters, VHF radios, AIS transponders, depth sounders, autopilots, and entertainment systems — professionally installed and integrated.
Diagnosing and resolving complex electrical faults and failures. We find the root cause and fix it right the first time.
Comprehensive vessel electrical inspections for pre-purchase, insurance, or peace of mind. Detailed written reports with recommendations.
Bought new electronics, batteries, or solar gear at the Vancouver International Boat Show sale, from the Harbour Chandler in Nanaimo, or online during boat-show season? We install it properly — wired, fused, integrated to your existing NMEA backbone, and documented for warranty and insurance.
MultiPlus inverter/chargers, MPPT solar controllers, Cerbo GX monitoring, SmartShunt, Lynx distribution. Designed and installed to spec — no guesswork on Ve.Bus or VE.Direct wiring.
Lowrance, Simrad, B&G, Garmin, Raymarine, Furuno — the brands Harbour Chandler and the boat show feature. We integrate them properly onto a clean NMEA 2000 backbone.
Lithium house bank installations, BMS integration, cable sizing for inverter loads, fuse / breaker selection. Boat show pricing on hardware doesn't help if the wiring undersizes the install.
AB Inflatables tender wiring, Torqeedo electric outboard charging integration, davit electrical, dinghy wiring runs. The small jobs that get skipped during the big install — done right.
Local-supply partner note: we're not affiliated with the Harbour Chandler in Nanaimo — we just install a lot of what they sell. Tell us what you bought and we'll bring the right cabling, fusing, and tooling to finish the job in one visit.
If you're running north from Seattle, Tacoma, Bellingham or Anacortes for the Gulf Islands and Desolation Sound circuit, we cover the Vancouver Island east coast you're transiting. Stop, sort the boat, keep cruising.
Nanaimo Harbour, Newcastle Island, Mark Bay, Departure Bay, Pipers Lagoon — wherever you've tied up or dropped the hook, we'll come to the boat.
Gabriola Pass, Dodd Narrows, Trincomali Channel — service coverage all the way down to Ladysmith/Chemainus and up to Parksville/Qualicum. Easy mid-route fix.
Shore-power fault diagnostics, battery bank issues mid-passage, NMEA 2000 instrument failures, solar charge controller problems, watermaker electrical, autopilot wiring. Quick turnarounds.
Familiar with US-flagged systems, mixed AC standards, and cruising-permit constraints on parts/install. Repairs documented properly for insurance and customs.
Pro tip: if you're planning your route, message ahead — we can hold a window for transient cruisers when slips are scarce. (403) 835-8404.
Detailed service-area pages for the marinas, harbours and anchorages we cover. If your stop isn't listed here we probably still cover it — call.
Deep Bay Harbour and surrounding waters — full marine electrical service. Common stop for cruisers running between the Strait of Georgia and Baynes Sound.
Ladysmith Harbour, Page Point Marina, and the Chemainus channel approach. Frequent mid-route stop for southbound and northbound transits.
Nanaimo Harbour · Newcastle Island · Mark Bay · Departure Bay · Parksville · Qualicum Beach · French Creek · Lantzville · Cedar · Yellow Point · Chemainus.
We understand boating on the BC coast. Every job done with attention to safety, quality, and the demands of the marine environment.
Fully mobile throughout Nanaimo and up to 120km. Work at your marina, dock, or anchorage — no need to move your vessel.
All work to Transport Canada and ABYC marine electrical standards. Your safety on the water is our first priority.
Your time on the water matters. We work efficiently and communicate clearly so you're back on the water fast.
Only proper marine-rated wiring, connectors, and components. No shortcuts — built to survive the BC marine environment.
Certified for marine electronics installation and NMEA 2000 backbone networks. Multi-vendor systems integrated to spec.
From Nanaimo Harbour to Parksville, Ladysmith, Chemainus, and beyond — professional marine electrical service right to your boat.
Call, email, or send a message. We'll get back to you quickly and arrange a time that works for you.